This manual provides essential information for the safe and effective use of your Garrison oil-filled heater. It includes guidance on operation, safety precautions, and maintenance; Please read this manual carefully before operating your heater. Retain this manual for future reference and warranty purposes.
Garrison oil-filled heaters are designed to provide supplemental heat for indoor spaces. These heaters utilize a permanently sealed system, filled with oil, that is heated electrically, offering a stable and efficient heating solution. The heated oil circulates within the unit, transferring warmth to the surrounding air. Garrison heaters are known for their quiet operation and ability to retain heat for a period even after being turned off. Many models feature adjustable heat settings, allowing users to customize the heat output to their preference. These heaters are intended for residential use and are available in various sizes and power levels. These heaters are designed to be portable and can be easily moved from room to room. It is important to follow all safety instructions provided in this manual to ensure safe and proper operation. Always ensure the heater is placed on a stable, level surface. Garrison heaters provide an excellent way to supplement your main heating system and to help keep you comfortable in the colder months.
Safety Precautions for Operation
Before operating your Garrison oil-filled heater, it is crucial to understand and adhere to all safety precautions. Always ensure the heater is plugged directly into a 120V AC, 60Hz wall outlet and never use extension cords or power strips, as this can cause overheating. Keep combustible materials such as furniture, pillows, bedding, papers, and curtains at least 3 feet (0.9 meters) away from the front, top, sides, and rear of the heater. Never leave the heater unattended while in use. Do not operate the heater in bathrooms or other humid environments. The heater should always be placed on a stable, level surface to prevent tipping. If the heater is tipped over, it has a safety tip-over switch that will automatically shut off the unit. Inspect the heater and cord regularly for damage, and do not use if there are any signs of damage. Do not attempt to repair the heater; if you encounter any problems, contact customer service. Ensure children and pets are supervised when the heater is in operation, and keep them at a safe distance to prevent accidental burns.
Heater Placement and Setup
Proper placement and setup of your Garrison oil-filled heater are crucial for optimal performance and safety. Begin by selecting a location that is in the coldest area of the room, ensuring that there is ample space around the heater for proper air circulation. Avoid placing the heater in high-traffic areas or where it could be easily bumped or knocked over. Make sure the heater is positioned on a flat, stable surface to prevent any risk of tipping. Before plugging the heater in, verify that the power switch is in the “off” position. Inspect the power cord and plug for any signs of damage. If you are assembling the heater, such as attaching the caster assembly, follow the instructions carefully, ensuring that all screws are securely tightened. Keep the cord away from any heat sources, and do not run it under carpets or furniture. Ensure the heater is not placed near water, such as in bathrooms or laundry rooms, to prevent electrical hazards. After setup, do not cover the heater with any material.
Operating Instructions for Garrison Heaters
Before initiating operation of your Garrison oil-filled heater, ensure it is placed upright on a stable and level surface, with the power switch in the “off” position. Plug the heater directly into a 120V A.C., 60Hz wall outlet; avoid using extension cords. Once plugged in, turn the power switch to the desired heat setting, typically low, medium, or high. Some models may have a digital display, which will indicate the current room temperature and selected heat level. Observe the power indicator light to confirm that the heater is on; Allow the heater a few minutes to warm up and begin circulating heat. If your model has a thermostat, adjust it to your desired temperature. Monitor the heater during initial use, and ensure that the tip-over safety switch is functioning correctly. Always be mindful of the heater’s proximity to combustible materials, such as furniture, bedding, and curtains, which should be kept at least 3 feet away. Never leave the heater unattended while in use, and always turn it off and unplug it when not needed.
Thermostat and Heat Settings
Garrison oil-filled heaters typically offer multiple heat settings, allowing you to customize the warmth output according to your needs. These settings usually include low, medium, and high, often corresponding to different power consumptions, such as 600W, 900W, and 1500W respectively. To adjust the heat output, locate the power switch or control panel, and select your desired level. If your heater includes a thermostat, use the controls to set your desired room temperature. The thermostat will automatically cycle the heater on and off to maintain the set temperature. Some models may feature a digital display that shows the current room temperature and the set point. When setting the thermostat, start with a low temperature and gradually increase it until you reach your comfort level. Be aware that the heater might take some time to reach the set temperature, and it will cycle on and off to maintain it. If the room is too warm, lower the set temperature to prevent overheating. Always ensure the heater is placed in a location where it can accurately sense the ambient temperature.
Tip-Over Safety Switch Functionality
Garrison oil-filled heaters are equipped with a crucial safety feature⁚ a tip-over safety switch. This switch is designed to automatically shut off the heater if it is accidentally knocked over or tilted from its upright position. This is a vital safety mechanism to prevent potential fire hazards and damage. The switch is usually located at the base of the heater and is activated when the unit is no longer in its normal upright orientation. When the heater tips over, the internal switch is triggered, immediately cutting off the power supply. Once the heater is placed back in an upright position, the switch should automatically reset, allowing the heater to resume operation. Always ensure that the heater is placed on a stable and level surface to minimize the risk of tipping. If the heater is tipped over and the safety switch activates, carefully place it back in its upright position. After that, check the power cord and plug are undamaged before attempting to restart the heater. Never attempt to bypass the tip-over safety switch, as this can lead to dangerous situations.
Maintenance and Cleaning Guidelines
To ensure the longevity and efficient operation of your Garrison oil-filled heater, regular maintenance and cleaning are essential. Before performing any maintenance, always unplug the heater from the power outlet and allow it to cool down completely. Never use gasoline, benzene, or thinners to clean the heater as these substances can damage the surface. For general cleaning, use a soft, damp cloth to wipe the exterior of the heater. Avoid getting water or other liquids into any of the openings or electrical components. Pay particular attention to the areas around the control panel and the heating fins, removing any dust or debris. After cleaning, ensure the unit is completely dry before plugging it back in. Periodically inspect the power cord and plug for any signs of damage, such as fraying or cracks. If any damage is found, discontinue use immediately and have the cord replaced by a qualified technician. Store the heater in a dry and safe place when not in use. By following these maintenance and cleaning guidelines, you will be able to keep your heater operating safely and effectively for years to come.
Recall Information for Specific Models
It’s crucial to be aware of any recall information pertaining to your Garrison oil-filled heater. Certain models have been subject to recalls due to potential safety issues. Specifically, some Garrison 1500W oil-filled heaters, identified by a silver label with specific model numbers and manufacturing date codes located on the underside of the unit, have been recalled. It’s essential to check your heater for this label and compare the information against official recall announcements. These announcements are often made by organizations such as Health Canada and the manufacturer, Midea International. If your heater matches the recalled model, discontinue use immediately. Do not attempt to repair the unit yourself. Contact the manufacturer or retailer from where you purchased the heater to determine the proper steps for replacement or refund. Ignoring recall information can put you and your property at risk. Regularly check official websites and news sources for any updated information regarding recalls for Garrison heaters. Your safety is paramount, and compliance with recall notices is essential.
Troubleshooting Common Issues
If your Garrison oil-filled heater is not functioning correctly, several common issues could be the cause. First, check that the heater is plugged securely into a functioning 120V A.C., 60Hz wall outlet. Ensure the power switches are in the “On” position. If the unit fails to power on, verify that the outlet is receiving power by testing it with another appliance. If the heater stops heating randomly, this could indicate an issue with the internal thermostat or safety tip-over switch. The tip-over switch will shut off the unit if it is not in an upright position. If this is the case, place the heater upright and allow it to reset. If the unit is on but not producing heat, make sure that the thermostat is set to your desired heat setting. If your model has a digital LCD display, confirm that it is displaying the correct temperature. If none of these solutions resolve the problem, it is recommended to contact customer service for assistance. Never attempt to disassemble or repair the unit yourself, as this could cause further damage and void any warranty.